Reload1
Campfire Greenhorn
R
Joined: Feb 2007
Posts: 57
So I have ended up with 5 Contender barrels, 10 Knight KP1 barrels and 1 SB2 Handi Rifle barrel. To save space I am only listing a single picture for each group. All of the barrels are in very good condition with great bores. I will gladly take additional pictures of whatever details you need. The following barrels are for the Contender and are in order of the barrels in the picture from top to bottom:
1. This is a 6.5 TCU TC Custom shop barrel. It is a 15" matte finish with the custom shop logo on the top of the barrel and made in Rochester so a nice barrel. The finish is in great shape with only a couple of mars on the matte. The biggest issue is the scope rail. It has been mucked with a little with an extra slot cut in the rail and a buggered screw opening. The rail can easily be replaced and I probably have one laying around. The forearm matches the profile of the barrel which is a tapered barrel down to a little more than 5/8" at the muzzle. The forearm is a 2 screw model, but only has 1 screw in it right now. I'll see if I have a spare. Barrel has both escutcheons. There are no front sight screw holes, just the 4 in the rear for the rail. I'm pretty sure it is worth the barrel I'm looking for as well as probably the dies and some brass to go with it. I'm going to put $450 as a price but would really prefer to trade.
2. The second barrel is also a 6.5 TCU but a standard Super 14. Finish is in very good condition with a few marks, standard rub marks and you can see where a scope rail was mounted. No scope rail or sights, no filler screws in front sight holes. Bore is great and should make a great shooter, $275.
3. This is a 10" Bull 7mm TCU barrel with the side saddle rear and standard front sight. Nice bluing with standard marks and great bore. $250.
4. This is also a 7mm TCU but a Super 14". Very good condition, also with a Williams side saddle rear sight. The Williams is much easier to adjust with knobs rather than screws like the standard TC, $275.
5. This is a Super 14, 7-30 Waters barrel. It has a few marks in the finish and 1 little pin head rust mark on the outside edge of the muzzle. I was going to keep the front swivel but was afraid it might leave a mark so going to leave it on the barrel, $275.
Next are the KP1 and Handi barrels. Again top to bottom. The 22LR and 17 HMR come in the clear plastic clam shell container. I’m not sure if they have been fired or not so we will call them lightly used. The other barrels are in very good condition but will show some handling marks. I really don’t think most of them have been fired but will say lightly used to be safe. Most of these barrels are not drilled for sights. I have a couple of extra scope mounts for $35 if the barrel you want doesn’t have one. Again I am happy to send additional pics if interested:
6.22LR barrel, 24”, blue, no sights or scope mount: $300
7. 17 HMR barrel, 24”, blue, no sights or scope mount: $300
8. 270 Win barrel, 24”, blue, no sights, has scope mount: $325
9. 308 Win barrel, 24”, blue, no sights, has scope mount: $325
10. 30-06 barrel, 24” S.S., no sights, no scope mount: $300
11. 300 Win Mag barrel, 26”, no sights, has scope mount: $325
12. 300 Win Mag barrel, 26”, no sights, has scope mount: $325
13. 45/70 barrel, 24”, blue, no sights, has scope mount:$325
14. 45/70 barrel, 24”, S.S., needs extractor, no sights or mount: $250
15. 50 cal muzzle loader barrel, has front sight and base for Williams rear,
No scope mount but has ram rod: $300
16. 22 Hornet, 22” Handi Rifle, Silver finish, has picatinny type scope rail, no
sights but has rear groove and front screw hole.
I mainly want to sell these but would consider other barrels in trade, Thanks for looking.
